JoeS09 Posted March 10, 2021 Posted March 10, 2021 (edited) Hello again. In cleaning up a drawing prior to sharing, is there any command that will delete all the Points I have used in the drawing? Also, I want to delete all the dimensions too Edited March 10, 2021 by JoeS09 Quote
BIGAL Posted March 11, 2021 Posted March 11, 2021 You can turn points off just select the blank style or (command "erase" (ssget "X" '(( 0 . "POINT"))) "") Big hint "DIMENSION" 1 Quote
eldon Posted March 11, 2021 Posted March 11, 2021 Now you know how to set the size of a point in Absolute units, set the size to some huge value. Then when you Zoom Extents, all your line work will be at the centre of the screen, and the points will extend to the edges of the screen. You can now Erase all the points using a crossing window or a fence selection on one side of the points, safe in the knowledge that all your work would not be selected. 1 Quote
eldon Posted March 11, 2021 Posted March 11, 2021 If all your dimensions are on layers by themselves, freeze those layers until only what you want to share is visible, then Wblock what remains on the screen. Then you get a nice clean drawing to share, without any hidden bits! Quote
SLW210 Posted March 11, 2021 Posted March 11, 2021 Or select one of what you need to delete, then select similar. I do templates pretty much as Eldon describes, just freeze the unnecessary layers and Wblock or DXFOUT if I need to send in .dxf. You never know when you'll need to revisit your original drawing. Quote
JoeS09 Posted March 12, 2021 Author Posted March 12, 2021 thanks for this info, everyone. Eldon, after you freeze and then Wblock, will this remove all the layers and send only a "0" default layer ? Sending to a CNC machine that prefers only "0" layer Quote
eldon Posted March 12, 2021 Posted March 12, 2021 Yes. As long as everything visible is on layer 0 then Wblock only has the layers of the selected entities. It sounds ideal for preparing for a CNC machine. Quote
BIGAL Posted March 12, 2021 Posted March 12, 2021 Wblock will save all layers currently on, you need a couple more steps a simple one is select all, have properties on and set layer to "0". The issue is that any blocks may have entities on a different layer so need a convert all block objects to layer "0" just google its out there. Quote
ILoveMadoka Posted April 1, 2021 Posted April 1, 2021 (edited) A PDMODE of zero will fix this.... PDMODE=0 makes them dots. PDMODE=1 makes them invisible Edited April 1, 2021 by ILoveMadoka Quote
SLW210 Posted April 1, 2021 Posted April 1, 2021 34 minutes ago, ILoveMadoka said: A PDMODE of zero will fix this.... PDMODE=0 makes them dots. PDMODE=1 makes them invisible But they are still there. Quote
ILoveMadoka Posted April 1, 2021 Posted April 1, 2021 I only mention it because I've seen people freak out in a similar situation thinking that the only way to get a workable drawing was to delete them when changing their appearance would have worked just fine. Oh my God! What is this??!! Change the PDMode setting... Nevermind... It may help someone in the future.. But you are correct... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.