madriver Posted January 18, 2021 Posted January 18, 2021 (edited) So some setting has mis aligned my UCS. It is set to world, SNAPANG is set to 0 but when I go to move an object the polar UCS is off angle by a few degrees and won't allow a straight 90 or zero degree move? Also when drawing a line the X axis will draw at 0 degrees but the Y axis will no draw 90 degrees. Thank You Edited January 18, 2021 by madriver Quote
Dadgad Posted January 19, 2021 Posted January 19, 2021 Could you please post a drawing misbehaving thusly? Quote
Dadgad Posted January 19, 2021 Posted January 19, 2021 Open your SYSVDLG window and cursor scroll through all of the sysytem variables which begin with UCS, as shown in the screenshot. Might want to check your UCSORTHO variable setting as shown too. Quote
Dadgad Posted January 20, 2021 Posted January 20, 2021 Nice one rkent! Not one with which I was familiar. Can only be called in Modelspace. Quote
rkent Posted January 20, 2021 Posted January 20, 2021 Thanks Dadgad, I have a key shortcut of two letters to return UCS and PLAN to World. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.