RetroCAD Posted January 3, 2020 Posted January 3, 2020 Happy new digitizer day! The Kurta unboxing video is up, along with config for AutoCAD Release 10. Do you have a Kurta story? Quote
f700es Posted January 6, 2020 Posted January 6, 2020 Oh man, learned on these back in Tech School in Acad r9 Dos ('89-'91). Quote
BIGAL Posted January 7, 2020 Posted January 7, 2020 You can still buy digitisers and they work with Windows 10 I know have played with one very cheap like $39 from Aldi. Quote
RetroCAD Posted January 7, 2020 Author Posted January 7, 2020 2 hours ago, BIGAL said: You can still buy digitisers and they work with Windows 10 I know have played with one very cheap like $39 from Aldi. Quote
f700es Posted January 7, 2020 Posted January 7, 2020 13 hours ago, BIGAL said: You can still buy digitisers and they work with Windows 10... Yeah they are from Wacom Quote
Jack_O'neill Posted January 7, 2020 Posted January 7, 2020 Never had a Kurta but have many days on a Summagraphics 12x12 Quote
hisnibs Posted September 30, 2021 Posted September 30, 2021 I purchased my 24" x 36" XLC Kurta tablet c. 1994. I believe Kurta started in the Apple world vs Microsoft? has been a great tool in its day, but hardly use it anymore. Prior to the advent of PCI architecture, my last 486 used a VESA video card. With it I could run Generic CADD in SVGA mode, but PCI has since downgraded that back to VGA-only. sigh... I later upgraded to General cadd Pro which is an enhanced Windows version of Generic CADD. I thought great--I can run my Kurta on that! Well, not so fast. My W7 system is 64 bit, and my General Cadd program is 32-bit. Not an apparent problem. However, the Kurta needed a special 3rd party interface to work--not the standard Wintab driver (forgot the name). This driver interface was 64 bit, and it required a 64-bit program to run with it. The developer of the interface passed away several years ago, so end of the road for Windows and any hope for SVGA support for General Cadd Pro. I can still run the Kurta and Generic Cadd on my other PC on which I have Arca Noae (nee EcomStation, nee OS/2) via the DOS set up, but alas only in VGA mode. A last resort if needed. 1 Quote
RetroCAD Posted September 30, 2021 Author Posted September 30, 2021 6 hours ago, hisnibs said: I can still run the Kurta and Generic Cadd on my other PC on which I have Arca Noae (nee EcomStation, nee OS/2) via the DOS set up, but alas only in VGA mode. A last resort if needed. Arca Noae seems very interesting. How long have you been running it? Quote
CyberAngel Posted October 4, 2021 Posted October 4, 2021 I used one of those in 1992. You had to stop every couple of hours and recalibrate it. That was considered high tech in 1992. Quote
BIGAL Posted October 6, 2021 Posted October 6, 2021 What about the big ones where they A0 size can not remember. These days plotter/scanner. Quote
Dana W Posted October 7, 2021 Posted October 7, 2021 Y'all had it easy. back in '82 all I had was a 48 x 96 drafting table, a digitizer mouse, and a 10 foot roll paper drawing from RCA. Then I'd take the resulting 12" data tape into the computer room where they'd stick it onto a VAX mini mainframe where I'd be connected by my trusty rusty Tektronix 1050 all steel graphics computer terminal and clean up the lines. Quote
BIGAL Posted October 7, 2021 Posted October 7, 2021 Talking old we had road traffic counters, and they produced paper punch tapes, my neighbour a electronics engineer made a paper tape reader that connected to our NEC 8" dual disk pc then had a basic program do the analysis, so ahead of its time. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.