Autocad Architecture - Roof

[MarkMelbourne]

 

I am trying to create the 450 Eave, the image represents what I am trying to achieve but some how I don't seem to get it to work. If there is anybody that can assist me in creating it using Autocad Architecture that would be great.

[CyberAngel]

Are you trying for the dimension or for the roof itself? Is it a scaling issue, a formatting issue, a linework issue, or something else? Where did the image come from if you can't make the drawing work? Any information you can provide will help us.

[SLW210]

I moved your thread to the Architecture & ADT Forum, you say your using AutoCAD Architectural, but your profile shows plain AutoCAD.

[wallmaxx]

450 mm soffit overhang?

 

Roof pitch?

Trusses or hand framed rafters?

HAP (Height Above Plate?

 

I don't understand the question. In Autocad Architecture does it auto build the overhangs? If so, maybe there's a setting where you set overhang and rave values.

 

I use 2D and just draw houses the way I used to frame them.

[wallmaxx]

SIRI is terrible. Overhang and eave values.

[MarkMelbourne]

I am trying to create a 450mm eave. The image I have saved it from a PDF file Basically I can't create a roof that looks like the image file.

 

I end up getting this type of a roof form.

[MarkMelbourne]

Thanks, I should have looked closely where I was posting my message.

[wallmaxx]

Your drawing appears to show facia and gutter and you just want to show gutter only?

[MarkMelbourne]

I am trying to create a fascia and gutter as depicted in red. Thanks for wanting help out.

[wallmaxx]

 

Does this help? (see image) Maybe your version does a bunch of detailing automatically for elevations....I've never used anything other than standard AutoCAD.

[MarkMelbourne]

I have been using Autocad too but I thought I might move onto Autocad Architecture but some how I could not work out.

 

 

 

 

 

Here is the detail again.