plotting in modelspace - cuts off part of drawing (only in some drawings)

[GISdude]

HI all,

I'm trying to plot in model space and the printer is cutting off part of the drawing. I choose plot-->extents --> center the plot --> fit to paper. The x coord is always 0, however the y coord is always at .09280. I've tried adjusting the y to 0, and unchecking the plot, but the cutoff always happens. Keep in mind, this is in a handful of drawings. I've plotted to a different plotter (XEROX) and it works perfectly fine. I've switched the PLOTOFFSET variable and it makes the problem worse.

 

My fear is this is a driver issue, Canon doesn't support this plotter anymore.

 

Many thanks for any help.

 

autocad map3d 2012, win7.

[BIGAL]

It sounds like hard clip limits you need to check the settings for the two different printers. If you have a outside border rectang and end up with a "L" thats clip limits. Put a "point" about .05 away from bottom left and top right pick those two points using window and fit, it should work now.