Vagulus Posted June 5, 2014 Posted June 5, 2014 I have an extrusion problem. Hover the cursor over Sketch 6 in the IPT file. My plan was to extrude (cut) areas A & B 25mm into the part. Problem is that I cannot select these areas by themselves. Why not and how can I fix this? Thanks _Extrude_Selection_Problem.ipt Quote
JD Mather Posted June 5, 2014 Posted June 5, 2014 Something like this? _Extrude_Selection_Problem.ipt Quote
Vagulus Posted June 5, 2014 Author Posted June 5, 2014 Something like this? I see you got it to work, but I can't figure out what you did. What was (were) the step(s) I missed. Thanks Quote
JD Mather Posted June 5, 2014 Posted June 5, 2014 If you investigate the sketch closely - you should see what I did, but I recommend you toss this one and start over as it is not modeled logically. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.