Sengna Posted August 20, 2013 Share Posted August 20, 2013 Does anybody know how to change lineweight on the circle? another word i want to make the arc line thicker. Can we do that rather than offset the circle and Hatch it. I use Pedit alot on straight line but won't work on circle. As you can see on the picture below when i changed the lineweight to be bigger but the circle is still the same. Please help. thanks. Quote Link to comment Share on other sites More sharing options...
nestly Posted August 20, 2013 Share Posted August 20, 2013 Do you have lineweight turned on in the status bar? Quote Link to comment Share on other sites More sharing options...
ReMark Posted August 20, 2013 Share Posted August 20, 2013 Find the toggle here. Quote Link to comment Share on other sites More sharing options...
eldon Posted August 20, 2013 Share Posted August 20, 2013 I use Pedit a lot on straight line but won't work on circle. One way around this is to draw your circle using the Donut command. Read the command line as the Donut works on a diameter size. Make the inside and outside diameter the same, and then Pedit will work on that to give a line width Quote Link to comment Share on other sites More sharing options...
JD Mather Posted August 20, 2013 Share Posted August 20, 2013 ... I use Pedit alot on straight line but won't work on circle. .... All my lineweights are controled By Layer. Quote Link to comment Share on other sites More sharing options...
Sengna Posted August 20, 2013 Author Share Posted August 20, 2013 you guys are awesome! i had the tool show/hide lineweight turn off (Tool found on the bottom of the screen by snap tools), i turned it on and the circle show thicker line. thanks everyone. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.