Extract coordinate data from AutoCAD

[ahmerjaved]

Hello all,

 

I work in a manufacturing facility and we are trying to come up with a way to extract data from an AutoCAD file in to a .KML or .CSV file which gives coordinate points, etc.

 

This will be used in a mapping-type software to display/highlight areas of the plant with zooming capabilities and information shown on the left-side. We are trying to make it look something like Google Maps, so it can used to determine areas of the plant undergoing work, lighting zones, etc.

 

We are in the preliminary stages of this project and I could use some help/advice on how you guys would approach this. I have intermediate AutoCAD knowledge, hence I am reaching out to the community.

 

In a nutshell, I want to be able to extract coordinate data from our layout(s) which can used to pinpoint locations on the map and highlight regions, etc. Perhaps it could export data in to Excel with attributes assigned to the coordinates which give Area, Bay Location, etc. The initial thought was to somehow export this to a .KML file and use that as a starting point.

 

Let me know what you guys think, and how to best approach this. Any help would be greatly appreciated! Thank you.

[Tyke]

You need to use Data Extraction to do what you want. If you just want the coordinates have a look on Lee Macs web site. Here's the link:

[ahmerjaved]

You need to use Data Extraction to do what you want. If you just want the coordinates have a look on Lee Macs web site. Here's the link:

 

Thanks for the info! I will look in to this website, and see what I can find to help me out.