Will9325 Posted November 8, 2011 Posted November 8, 2011 This seems like a simple setting but I can not find it. I am working on a drawing that has been created by another firm. Due to the building not having the normal 0/90 walls they have rotated the orthographic projection to a 15 degree angle. When I try and draw a straight line in the "straight" part of the building with my ortho on, it pulls the aperture to 15 degrees. Yes, I could turn my ortho off but would prefer to toggle the angle between 15 degrees and 0/180 degrees. What is the setting to change it and how do I get there? Quote
rkent Posted November 8, 2011 Posted November 8, 2011 Probably the ucs has been rotated, use the ucs command, save option first, give it a name, then use the ucs world option. Quote
Will9325 Posted November 8, 2011 Author Posted November 8, 2011 nope checked that. It is set to world Quote
eldon Posted November 8, 2011 Posted November 8, 2011 Perhaps the SNAPANG has been set to align with the building Quote
alanjt Posted November 8, 2011 Posted November 8, 2011 Check SNAPANG and make sure view is set to TOP. Quote
Will9325 Posted November 8, 2011 Author Posted November 8, 2011 Yep! Snapang was set to 45 degrees! man, I feel like a dumb arse. Thanks for the help. It has baffled me for a few hours. You da man alan! Thank you, Will9325 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.