rodrigo_gcmsoft Posted March 29, 2011 Posted March 29, 2011 Hello everybody, I need your help again. From a line, how can I make an offset to both sides? Thank you all! Rodrigo Quote
mdbdesign Posted March 30, 2011 Posted March 30, 2011 Try LeeMac tool: http://lee-mac.com/doubleoffset.html and Alan's: OffsetConnect.LSP Quote
rodrigo_gcmsoft Posted March 30, 2011 Author Posted March 30, 2011 Thanks mdbdesign. I forgot to mention that I need help using c # or vb.net, but thank you very much good will! Quote
Kerry Brown Posted March 31, 2011 Posted March 31, 2011 Have a look here http://docs.autodesk.com/ACD/2010/ENU/AutoCAD%20.NET%20Developer's%20Guide/files/WS1a9193826455f5ff2566ffd511ff6f8c7ca-3f64.htm Quote
rodrigo_gcmsoft Posted March 31, 2011 Author Posted March 31, 2011 Have a look herehttp://docs.autodesk.com/ACD/2010/ENU/AutoCAD%20.NET%20Developer's%20Guide/files/WS1a9193826455f5ff2566ffd511ff6f8c7ca-3f64.htm Thanks buddy, I did not know there was such documentation. It was all I needed! Thank you. Rodrigo Quote
Kerry Brown Posted April 2, 2011 Posted April 2, 2011 Thanks buddy, I did not know there was such documentation. It was all I needed! Thank you. Rodrigo In that case, have a look here http://www.theswamp.org/index.php?board=27.0 Quote
rodrigo_gcmsoft Posted April 2, 2011 Author Posted April 2, 2011 Thanks Kerry! I'm going to register on the forum. Rodrigo Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.