crosithious Posted December 31, 2010 Posted December 31, 2010 hello, i've been trying to find a way to create a cone with an "non-centered" point. That point being 2 units from the center of the circle. here's the dimensions. R=5 H=10 center of the height is moved 2units down from the center of the cone any and all help is appreciated. thank you Quote
fuccaro Posted December 31, 2010 Posted December 31, 2010 Hello Crosithious, welcome in the forum! Try to get some help from these old posts: http://www.cadtutor.net/forum/showthread.php?33733-Eccentric-Reducer-Difficulties...& http://www.cadtutor.net/forum/showthread.php?824-Cone-with-2-different-Center-points-and-2-differente-dia. Some of the Lisp routines posted there are affected by an older forum moving, post here if you are interested and someone will clean them up for you. Good luck! Quote
JD Mather Posted December 31, 2010 Posted December 31, 2010 Circle radius 5 Line up 10 over 2 Loft - pick circle PO click apex endpoint S change Settings to G0 continuity. (see attached) (you might change facetres to 10) Quote
crosithious Posted January 4, 2011 Author Posted January 4, 2011 i tried what ya'll posted and it worked. Thank you Fuccaro for the links and advise and thank you JD Mather for the tutorial-in-a-picture. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.