resullins Posted September 29, 2011 Posted September 29, 2011 Did anyone ever get that "High Pay Job in Drafting"? I'm still working on that. I'm pretty sure you have to sell your soul, though... and I seem to have misplaced mine. Quote
Jack_O'neill Posted September 29, 2011 Posted September 29, 2011 I like the bit where it says "you need no drawing skill...no technical ability". Now we know where all these people come from that we get on here and gripe about!! Quote
Squirltech Posted September 29, 2011 Posted September 29, 2011 I like the bit where it says "you need no drawing skill...no technical ability". Now we know where all these people come from that we get on here and gripe about!! I resemble that remark... Quote
SLW210 Posted September 29, 2011 Posted September 29, 2011 I resemble that remark... Judging by your avatar and ReMark's avatar, I would say you do not resemble that ReMark. On closer inspection...maybe........ Quote
Dana W Posted September 29, 2011 Posted September 29, 2011 Did anyone ever get that "High Pay Job in Drafting"? Well, right after I got drafted after high school (in which I took a drafting class) in 1967, I hadda walk up two flights of stairs to see the paymaster in basic training. Does that count? Prolly not, the only tool the army taught me to use that made anything close to a straight line was a rifle. I could make curved lines at 1000 m with the tracers from a ma deuce (M2 Browning 50 cal machine gun). Quote
ReMark Posted September 29, 2011 Posted September 29, 2011 Remember any of these? Drafting tables as large as a sheet of plywood. 2" high Leroy lettering templates with a scribe that had to be 6-8" long. Koh-i-noor pens. Blueline pencils. .3mm, .5mm, .7mm and .9mm Pentel mechanical pencils. Pencil sharpener on your drafting board. Thin sheets of sandpaper on a wood handle for sharpening lead points. Lead shot bean bags for holding down drawings. Quote
Dana W Posted September 30, 2011 Posted September 30, 2011 Remember any of these? Drafting tables as large as a sheet of plywood. I worked on a drafting table that was a full sheet of plywood, in a construction trailer, building residential homes in Waldorf MD back in the 70's. It had a sheet of linoleum glued to the surface:shock: and the lower right corner was riddled with cigarette burns. Quote
ReMark Posted September 30, 2011 Posted September 30, 2011 We covered our drafting boards with a piece of vinyl that had a different color on both sides. Green on one side and a buff color on the other. Would attach it to the drafting table using double-sided tape. Quote
Dipali Posted September 30, 2011 Posted September 30, 2011 I sometimes miss those hand drafting days........... Quote
Dana W Posted September 30, 2011 Posted September 30, 2011 We covered our drafting boards with a piece of vinyl that had a different color on both sides. Green on one side and a buff color on the other. Would attach it to the drafting table using double-sided tape. Me too. Self healing board covers, they were called. I suppose you could consider them self healed because you could barely see all the razor knife cuts in the surface from the old fashioned cut/paste methods, and the cuts didn't catch on the pencil lead. At least they were invisible until they filled up with graphite dust. Quote
ReMark Posted September 30, 2011 Posted September 30, 2011 (edited) I have a set of drawings for my house (built 1 9 0 8 that was done by hand in ink on linen. Looks like a piece of art. Edited October 5, 2011 by ReMark Quote
BigDog Posted October 5, 2011 Posted October 5, 2011 My senior year of high school started when AutoCAD R12 was released. I walked into my last drafting class the first day of school and the teacher handed my the R12 book and told me to see how far I could get buy the end of the year. The good old days. Quote
DANIEL Posted October 5, 2011 Posted October 5, 2011 I've done burnt stick on wooly mammoth hide, no, wait .... thats just what type of drawings I get from vendors sometimes ....... Quote
f700es Posted October 5, 2011 Posted October 5, 2011 I have a set of drawings for my house (built 1908) that was done by hand in ink on linen. Looks like a piece of art. Those rock! I was digging through the old plans we have here and dug up the original chapel drawing from 1951. Artwork in it's highest form IMHO. Here's a snippet.. Quote
Manila Wolf Posted October 22, 2011 Posted October 22, 2011 NTS Was often "Not to scale", but more commonly "Not Too Sure" Quote
Bill Tillman Posted November 3, 2011 Posted November 3, 2011 ... you seriously considered entering the field because of an ad in a comic book. [ATTACH=CONFIG]30299[/ATTACH] CyberAngel, I can't believe you found this somewhere. Believe it or not this is the very ad that I saw and what got me interested in becoming a draftsman. I can't remember which magazine I was reading but this was the ad and I remember it well. It would have been sometime in the early 1970's I think for me it would have been around 1972 or 1973. We all complain about the pay, but I remember getting out of college with my AA degree in Drafting Technology and immediately commanding the astronomical pay rate of $6 per hour. This was in 1978 when most of my friends were lucky to get $4 per hour. Then not long afterwards I was making the then unheard of sum of $10 per hour. Shessh, I didn't know what to do with all the cash so I blew it all on wine, women and song....These days it's not as easy to command the big bucks and jobs are few and far between. Quote
cadvision Posted November 23, 2011 Posted November 23, 2011 when you're called a "draftsman" "draughtsman" and not a cad operator. Trained on a drawing board and proud of it Quote
amarcon Posted November 23, 2011 Posted November 23, 2011 You know you are an old Draughtsman when............................ - when asked what you do for a crust? you'd reply.... 'scratching for a living'. - you know a parallel motion machine is not an exerciser. - a lettering guide is not a pamphlet. - you knew every rotring pen thickness by colour. This is priceless.... I was a senior detailer by the time AutoCAD v1.14 became available in Australia in 1983/4?...... gosh I *AM* and old draughtsman. We were annoyed because the first CAD drawing I did took a full 40hr week to complete, when it used to take 4hrs on the board After 12 months I had the same drawing down to around 1/2 hr Quote
resullins Posted November 23, 2011 Posted November 23, 2011 when you're called a "draftsman" "draughtsman" and not a cad operator. Trained on a drawing board and proud of it Hey... I might be the youngest regular contributor here, and even I learned on a board, by hand. I still have carpal tunnel in my left wrist from it! It's all about having educators that appreciate the classics. Quote
Organic Posted November 23, 2011 Posted November 23, 2011 when you're called a "draftsman" "draughtsman" and not a cad operator. Trained on a drawing board and proud of it Politically incorrect, you are forgetting the women... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.