Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 10/06/2023 in all areas

  1. You posted your thread in the LISP Forum, but inquired about VBA. Which do you want?
    1 point
  2. fuccaro I work metric but its easy for feet and inches etc depending on the second value is what is displayed in feet and inches eg 4 2.
    1 point
  3. Here is something OP can accept, but it has lacks... Still another attempt - better more than less... (defun c:dentrepair-MMR ( / *error* makelw unique collinear-p clockwise-p rlw osm cmd adoc r ss i lw ll lr ur ul lwo pl data d dx pll plll segs segsv segsh pre suf ) (vl-load-com) (defun *error* ( m ) (if osm (setvar 'osmode osm) ) (if cmd (setvar 'cmdecho cmd) ) (if (= 8 (logand 8 (getvar 'undoctl))) (vla-endundomark adoc) ) (if m (prompt m) ) (princ) ) (defun makelw ( pl cl ) (entmakex (append (list '(0 . "LWPOLYLINE") '(100 . "AcDbEntity") '(100 . "AcDbPolyline") (cons 90 (length pl)) (cons 70 cl) ) (mapcar '(lambda ( p ) (cons 10 p)) pl) '((210 0.0 0.0 1.0)) ) ) ) (defun unique ( lst ) (if lst (cons (car lst) (unique (vl-remove-if '(lambda ( x ) (equal x (car lst) 1e-6)) (cdr lst))) ) ) ) (defun collinear-p ( p1 p p2 ) (equal (distance p1 p2) (+ (distance p1 p) (distance p p2)) 1e-6) ) (defun clockwise-p ( p1 p2 p3 ) (minusp (- (* (car (mapcar '- p2 p1)) (cadr (mapcar '- p3 p1))) (* (cadr (mapcar '- p2 p1)) (car (mapcar '- p3 p1))))) ) (defun rlw ( lw / e x1 x2 x3 x4 x5 x6 ) ;; by ElpanovEvgeniy (if (= (cdr (assoc 0 (setq e (entget lw)))) "LWPOLYLINE") (progn (foreach a1 e (cond ((= (car a1) 10) (setq x2 (cons a1 x2))) ((= (car a1) 40) (setq x4 (cons (cons 41 (cdr a1)) x4))) ((= (car a1) 41) (setq x3 (cons (cons 40 (cdr a1)) x3))) ((= (car a1) 42) (setq x5 (cons (cons 42 (- (cdr a1))) x5))) ((= (car a1) 210) (setq x6 (cons a1 x6))) (t (setq x1 (cons a1 x1))) ) ) (entmod (append (reverse x1) (append (apply 'append (apply 'mapcar (cons 'list (list x2 (cdr (reverse (cons (car x3) (reverse x3)))) (cdr (reverse (cons (car x4) (reverse x4)))) (cdr (reverse (cons (car x5) (reverse x5)))) ) ) ) ) x6 ) ) ) (entupd lw) ) ) ) (setq osm (getvar 'osmode)) (setvar 'osmode 0) (setq cmd (getvar 'cmdecho)) (setvar 'cmdecho 0) (setq adoc (vla-get-activedocument (vlax-get-acad-object))) (if (= 8 (logand 8 (getvar 'undoctl))) (vla-endundomark adoc) ) (vla-startundomark adoc) (initget 4) (setq r (getdist "\nPick or specify radius of distance segment line length <1.5> : ")) (if (not r) (setq r 1.5) ) (prompt "\nSelect closed polygonal orthogonal LWPOLYLINE(s)...") (if (setq ss (ssget '((0 . "LWPOLYLINE") (-4 . "&") (70 . 1) (-4 . "<not") (-4 . "<>") (42 . 0) (-4 . "not>")))) (repeat (setq i (sslength ss)) (setq lw (ssname ss (setq i (1- i)))) (setq pl nil pll nil data nil segsv nil segsh nil segs nil) (setq lwo (vlax-vla-object->ename (car (vlax-invoke (vlax-ename->vla-object lw) 'offset -1e-3)))) (if (< (vlax-curve-getarea lwo) (vlax-curve-getarea lw)) (entdel lwo) (progn (entdel lwo) (rlw lw) ) ) (vla-getboundingbox (vlax-ename->vla-object lw) 'll 'ur) (mapcar 'set '(ll ur) (mapcar 'safearray-value (list ll ur))) (setq lr (list (car ur) (cadr ll)) ul (list (car ll) (cadr ur))) (if (and (>= r (- (car ur) (car ll))) (>= r (- (cadr ur) (cadr ll)))) (makelw (list ll lr ur ul) (1+ (* 128 (getvar 'plinegen)))) (progn (setq pl (mapcar 'cdr (vl-remove-if '(lambda ( x ) (/= (car x) 10)) (entget lw)))) (setq data (mapcar '(lambda ( a b ) (list a b (distance a b) (angle a b))) pl (append (cdr pl) (list (car pl))))) (while (setq d (car data)) (setq data (cdr data)) (if (>= r (caddr d)) (cond ( (or (equal (cadddr d) (* 0.5 pi) 1e-6) (equal (cadddr d) (* 1.5 pi) 1e-6)) (setq segsv (cons (list (car d) (cadr d)) segsv)) ) ( (or (equal (cadddr d) (* 0.0 pi) 1e-6) (equal (cadddr d) (* 1.0 pi) 1e-6) (equal (cadddr d) (* 2.0 pi) 1e-6)) (setq segsh (cons (list (car d) (cadr d)) segsh)) ) ) ) ) (setq data (mapcar '(lambda ( a b ) (list a b)) pl (append (cdr pl) (list (car pl))))) (setq segs (unique (append segsv segsh))) (mapcar '(lambda ( a ) (vl-some '(lambda ( b ) (if (equal a b 1e-6) (setq pll (cons (car a) pll) pll (cons (cadr a) pll)))) segs)) data) (if pll (progn (setq pll (vl-remove-if '(lambda ( x ) (or (null (car x)) (null (cadr x)))) (unique pll))) (setq data (mapcar '(lambda ( a b ) (list a b (distance a b) (angle a b))) pll (append (cdr pll) (list (car pll))))) (foreach d data (if (not (or (equal (cadddr d) (* 0.5 pi) 1e-6) (equal (cadddr d) (* 1.5 pi) 1e-6) (equal (cadddr d) (* 0.0 pi) 1e-6) (equal (cadddr d) (* 1.0 pi) 1e-6) (equal (cadddr d) (* 2.0 pi) 1e-6))) (progn (setq pre (reverse (vl-member-if '(lambda ( x ) (equal x (car d) 1e-6)) (reverse pll)))) (setq suf (vl-member-if '(lambda ( x ) (equal x (cadr d) 1e-6)) pll)) (setq dx (cons (list (car (car d)) (cadr (cadr d))) dx)) (setq dx (cons (list (cadr (cadr d)) (car (car d))) dx)) (setq dx (cons (list (cadr (car d)) (car (cadr d))) dx)) (setq dx (cons (list (car (cadr d)) (cadr (car d))) dx)) (foreach x dx (if (and (clockwise-p (last pre) x (car suf)) (or (equal (angle (last pre) x) (* 0.0 pi) 1e-6) (equal (angle (last pre) x) (* 0.5 pi) 1e-6) (equal (angle (last pre) x) (* 1.0 pi) 1e-6) (equal (angle (last pre) x) (* 1.5 pi) 1e-6) (equal (angle (last pre) x) (* 2.0 pi) 1e-6)) (or (equal (angle x (car suf)) (* 0.0 pi) 1e-6) (equal (angle x (car suf)) (* 0.5 pi) 1e-6) (equal (angle x (car suf)) (* 1.0 pi) 1e-6) (equal (angle x (car suf)) (* 1.5 pi) 1e-6) (equal (angle x (car suf)) (* 2.0 pi) 1e-6))) (setq pll (append pre (list x) suf)) ) ) (setq dx nil) ) ) ) (setq pll (unique pll)) (setq pll (vl-remove nil (apply 'append (mapcar '(lambda ( a b c ) (if (collinear-p a b c) (list nil) (list b))) (cons (last pll) (reverse (cdr (reverse pll)))) pll (append (cdr pll) (list (car pll))))))) (setq lwo (makelw pll (1+ (* 128 (getvar 'plinegen))))) (if (> (vlax-curve-getarea lw) (vlax-curve-getarea lwo)) (entdel lwo) ) ) ) ) ) ) ) (*error* nil) ) HTH. M.R.
    1 point
  4. I've put together something similar - it looks for distance, but then just remove segments leaving non orthogonal polyline which is what OP don't want... But nevertheless here is the code : (defun c:dentrepair-MR ( / *error* makelw unique collinear-p adoc r ss i lw pl data d pll segsv segsh ) (vl-load-com) (defun *error* ( m ) (if (= 8 (logand 8 (getvar 'undoctl))) (vla-endundomark adoc) ) (if m (prompt m) ) (princ) ) (defun makelw ( pl cl ) (entmake (append (list '(0 . "LWPOLYLINE") '(100 . "AcDbEntity") '(100 . "AcDbPolyline") (cons 90 (length pl)) (cons 70 cl) ) (mapcar '(lambda ( p ) (cons 10 p)) pl) '((210 0.0 0.0 1.0)) ) ) ) (defun unique ( lst ) (if lst (cons (car lst) (unique (vl-remove-if '(lambda ( x ) (equal x (car lst) 1e-6)) (cdr lst))) ) ) ) (defun collinear-p ( p1 p p2 ) (equal (distance p1 p2) (+ (distance p1 p) (distance p p2)) 1e-6) ) (setq adoc (vla-get-activedocument (vlax-get-acad-object))) (if (= 8 (logand 8 (getvar 'undoctl))) (vla-endundomark adoc) ) (vla-startundomark adoc) (initget 4) (setq r (getdist "\nPick or specify radius of distance segment line length <1.5> : ")) (if (not r) (setq r 1.5) ) (prompt "\nSelect closed polygonal orthogonal LWPOLYLINE(s)...") (if (setq ss (ssget '((0 . "LWPOLYLINE") (-4 . "&") (70 . 1) (-4 . "<not") (-4 . "<>") (42 . 0) (-4 . "not>")))) (repeat (setq i (sslength ss)) (setq lw (ssname ss (setq i (1- i)))) (vla-getboundingbox (vlax-ename->vla-object lw) 'll 'ur) (mapcar 'set '(ll ur) (mapcar 'safearray-value (list ll ur))) (if (and (>= r (- (car ur) (car ll))) (>= r (- (cadr ur) (cadr ll)))) (makelw (list ll (list (car ur) (cadr ll)) ur (list (car ll) (cadr ur))) (1+ (* 128 (getvar 'plinegen)))) (progn (setq pl (mapcar 'cdr (vl-remove-if '(lambda ( x ) (/= (car x) 10)) (entget lw)))) (setq data (mapcar '(lambda ( a b ) (list a b (distance a b) (angle a b))) pl (append (cdr pl) (list (car pl))))) (while (setq d (car data)) (setq data (cdr data)) (if (>= r (caddr d)) (cond ( (or (equal (cadddr d) (* 0.5 pi) 1e-6) (equal (cadddr d) (* 1.5 pi) 1e-6)) (setq segsv (cons (list (car d) (cadr d)) segsv)) ) ( (or (equal (cadddr d) (* 0.0 pi) 1e-6) (equal (cadddr d) (* 1.0 pi) 1e-6) (equal (cadddr d) (* 2.0 pi) 1e-6)) (setq segsh (cons (list (car d) (cadr d)) segsh)) ) ) ) ) (setq data (mapcar '(lambda ( a b ) (list a b)) pl (append (cdr pl) (list (car pl))))) (mapcar '(lambda ( a ) (vl-some '(lambda ( b ) (if (equal a b 1e-6) (setq pll (cons (car a) pll) pll (cons (cadr a) pll)))) (append segsv segsh))) data) (if pll (progn (setq pll (unique pll)) (setq pll (vl-remove nil (apply 'append (mapcar '(lambda ( a b c ) (if (collinear-p a b c) (list nil) (list b))) (cons (last pll) (reverse (cdr (reverse pll)))) pll (append (cdr pll) (list (car pll))))))) (makelw (unique pll) (1+ (* 128 (getvar 'plinegen)))) ) ) (setq pll nil) ) ) ) ) (*error* nil) ) HTH. M.R.
    1 point
  5. I am satisfied with my intervention... OP : You can check it now and tell us is it satisfying your request... HTH. M.R.
    1 point
  6. @exceed Sorry for stealing your code, I just made quick fix, as OP wasn't satisfied... ; DentRepair - 2023.09.15 exceeds ; Dent repairs polyline segments with vertical and horizontal outlines outwards. ; If the length of one line segment is less than a certain value, it adjusted out to a wider side. (defun c:DentRepair ( / *error* LM:group<n LM:group<n-sub LM:SubstNth LM:Unique dtr rtd collinear-p lwpolybylist acdoc ss index ent obj clist cllen isclosed index2 p0 p1 p2 p3 linelength lineangle setlength tempclist1 tempclist2 temp1 temp2 temp1obj temp2obj temp1area temp2area stopper resultent clistx ps pe ) (vl-load-com) (defun *error* (msg) (if (/= msg "Function cancelled") (princ (strcat "\nError: " msg)) ) (vla-EndUndoMark acdoc) (princ) ) ;; Group by Number - Lee Mac ;; Groups a list 'l' into a list of lists, each of max length 'n' (defun LM:group<n ( l n ) (if l (LM:group<n-sub (cons nil l) n n)) ) (defun LM:group<n-sub ( l m n ) (if (and (cdr l) (< 0 n)) (LM:group<n-sub (cons (cons (cadr l) (car l)) (cddr l)) m (1- n)) (cons (reverse (car l)) (LM:group<n (cdr l) m)) ) ) ;;---------------------=={ Subst Nth }==----------------------;; ;; ;; ;; Substitutes an item at the nth position in a list. ;; ;;------------------------------------------------------------;; ;; Author: Lee Mac, Copyright © 2011 - www.lee-mac.com ;; ;;------------------------------------------------------------;; ;; Arguments: ;; ;; a - item to substitute ;; ;; n - position in list to make the substitution ;; ;; l - list in which to make the substitution ;; ;;------------------------------------------------------------;; ;; Returns: Resultant list following the substitution ;; ;;------------------------------------------------------------;; (defun LM:SubstNth ( a n l ) (if l (if (zerop n) (cons a (cdr l)) (cons (car l) (LM:SubstNth a (1- n) (cdr l))) ) ) ) ;; Unique - Lee Mac ;; Returns a list with duplicate elements removed. (defun LM:Unique ( l ) (if l (cons (car l) (LM:Unique (vl-remove (car l) (cdr l))))) ) ; degree to radian (defun dtr (a) (setq x (* pi (/ a 180.0))) ) ; radian to degree (defun rtd (a) (setq x (/ (* a 180) pi)) ) (defun collinear-p ( p1 p p2 ) (equal (distance p1 p2) (+ (distance p1 p) (distance p p2)) 1e-6) ) (defun lwpolybylist (lst cls) (entmakex (append (list (cons 0 "LWPOLYLINE") (cons 100 "AcDbEntity") (cons 100 "AcDbPolyline") (cons 90 (length lst)) (cons 70 cls) ) (mapcar (function (lambda (p) (cons 10 p))) lst) ) ) ) (setq acdoc (vla-get-ActiveDocument (vlax-get-ACAD-Object))) (vla-StartUndoMark acdoc) (setq setlength (getreal "\n Input Minimum Segment Value (Space Bar = 1.5): ")) ; can edit this value (if (= setlength nil) (setq setlength 1.5) (setq setlength (abs setlength)) ) (setq ss (ssget '((0 . "LWPOLYLINE")))) (repeat (setq index (sslength ss)) (setq ent (ssname ss (setq index (1- index)))) (setq obj nil clist nil cllen nil isclosed nil resultent nil p1 nil p2 nil p0 nil p3 nil linelength nil lineangle nil tempclist1 nil tempclist2 nil temp1 nil temp2 nil temp1area nil temp2area nil temp1obj nil temp2obj nil) (setq obj (vlax-ename->vla-object ent)) (setq clist (vlax-safearray->list (vlax-variant-value (vlax-get-property obj 'coordinates)))) (setq cllen (length clist)) (setq isclosed (vlax-get-property obj 'closed)) ;(princ "\n isclosed? ") ;(princ isclosed) (if (= isclosed :vlax-false) (progn (if (and (= (car clist) (nth (- cllen 2) clist)) (= (cadr clist) (nth (- cllen 1) clist))) (progn) (setq clist (append clist (list (car clist) (cadr clist)))) ) ) ) (setq clist (lm:unique (lm:group<n clist 2))) ;(princ "\n clist - ") ;(princ clist) (setq cllen (length clist)) (setq index2 0) (if (>= cllen 4) (progn (repeat cllen (if (and (/= index2 0) (/= resultent nil)) (entdel resultent) ) (setq p1 (nth index2 clist)) (if (= (- cllen 1) index2) (setq p2 (nth 0 clist)) (setq p2 (nth (+ index2 1) clist)) ) (if (= index2 0) (setq p0 (last clist)) (setq p0 (nth (- index2 1) clist)) ) (if (<= index2 (- cllen 3)) (setq p3 (nth (+ index2 2) clist)) (setq p3 (nth (- (+ index2 2) cllen) clist)) ) (setq linelength (distance p1 p2)) ;(princ "\n linelength - ") ;(princ linelength) (setq lineangle (rtd (angle p1 p2))) ;(princ "\n lineangle - ") ;(princ lineangle) (setq tempclist1 '()) (setq tempclist2 '()) (if (>= linelength setlength) (progn ;(if (or (= lineangle 0) (= lineangle 90) (= lineangle 180) (= lineangle 270) (= lineangle 360)) ; (progn) ; (progn) ;) ) (progn (cond ( (or (= (rtos lineangle 2 0) "0") (= (rtos lineangle 2 0) "180") (= (rtos lineangle 2 0) "360")) ;horizontal line (setq tempclist1 (LM:SubstNth (list (car p1) (cadr p0)) index2 clist)) (setq tempclist1 (LM:SubstNth (list (car p2) (cadr p0)) (if (= (- cllen 1) index) 0 (+ index2 1)) tempclist1)) (setq tempclist2 (LM:SubstNth (list (car p1) (cadr p3)) index2 clist)) (setq tempclist2 (LM:SubstNth (list (car p2) (cadr p3)) (if (= (- cllen 1) index) 0 (+ index2 1)) tempclist2)) ) ( (or (= (rtos lineangle 2 0) "90") (= (rtos lineangle 2 0) "270")) ;verical line (setq tempclist1 (LM:SubstNth (list (car p0) (cadr p1)) index2 clist)) (setq tempclist1 (LM:SubstNth (list (car p0) (cadr p2)) (if (= (- cllen 1) index) 0 (+ index2 1)) tempclist1)) (setq tempclist2 (LM:SubstNth (list (car p3) (cadr p1)) index2 clist)) (setq tempclist2 (LM:SubstNth (list (car p3) (cadr p2)) (if (= (- cllen 1) index) 0 (+ index2 1)) tempclist2)) ) ( t (setq tempclist1 clist) (setq tempclist2 clist) ) ) ;(princ "\n tempclist1 - ") ;(princ tempclist1) (setq temp1 (lwpolybylist tempclist1 1)) ;(princ "\n tempclist2 - ") ;(princ tempclist2) (setq temp2 (lwpolybylist tempclist2 1)) (setq temp1obj (vlax-ename->vla-object temp1)) (setq temp2obj (vlax-ename->vla-object temp2)) (setq temp1area (vla-get-area temp1obj)) (setq temp2area (vla-get-area temp2obj)) (if (>= temp1area temp2area) (setq clist tempclist1) (setq clist tempclist2) ) (entdel temp1) (entdel temp2) ) ) ;(setq stopper (getstring "\n continue ? : ")) ;(princ "\n index2 - ") ;(princ index2) ;(princ " / cllen - ") ;(princ cllen) (setq index2 (+ index2 1)) ) ) (progn (princ "\n not enough vertices. (less then 4)") ) ) ;(setq stopper (getstring "\n continue ? : ")) (setq clistx nil) (setq clist (LM:Unique clist)) (if (vl-some '(lambda ( a b ) (not (or (equal (angle a b) (* 0.0 pi) 1e-8) (equal (angle a b) (* 0.5 pi) 1e-8) (equal (angle a b) (* 1.0 pi) 1e-8) (equal (angle a b) (* 1.5 pi) 1e-8) (equal (angle a b) (* 2.0 pi) 1e-8)))) (append clist clist) (append (cdr clist) (list (car clist)) (cdr clist) (list (car clist)))) (progn (setq clistx (vl-remove (last clist) clist)) (if (vl-some '(lambda ( a b ) (not (or (equal (angle a b) (* 0.0 pi) 1e-8) (equal (angle a b) (* 0.5 pi) 1e-8) (equal (angle a b) (* 1.0 pi) 1e-8) (equal (angle a b) (* 1.5 pi) 1e-8) (equal (angle a b) (* 2.0 pi) 1e-8)))) (append clistx clistx) (append (cdr clistx) (list (car clistx)) (cdr clistx) (list (car clistx)))) (setq clistx (vl-remove (car clist) clist)) ) (setq pe (last clist)) (setq ps (car clist)) (cond ( (< (abs (- (car pe) (car ps))) setlength) (setq clist (LM:SubstNth (list (car (nth 1 clist)) (cadr (nth (1- (length clist)) clist))) 0 clist)) (setq clist (vl-remove (last clist) clist)) (setq clist (append clist (list (list (car ps) (cadr pe))))) ) ( (< (abs (- (cadr pe) (cadr ps))) setlength) (setq clist (LM:SubstNth (list (cadr (nth 1 clist)) (car (nth (1- (length clist)) clist))) 0 clist)) (setq clist (vl-remove (last clist) clist)) (setq clist (append clist (list (list (car pe) (cadr ps))))) ) ) (setq clistx clist) (if (or (< (abs (- (car pe) (car ps))) setlength) (< (abs (- (cadr pe) (cadr ps))) setlength)) (setq clistx (append (list (list (car (cadr clistx)) (cadr (last clistx)))) (cdr clistx))) ) ) (setq clistx clist) ) (setq clistx (vl-remove nil (apply 'append (mapcar '(lambda ( a b c ) (if (collinear-p a b c) (list nil) (list b))) (cons (last clistx) (reverse (cdr (reverse clistx)))) clistx (append (cdr clistx) (list (car clistx))))))) (if (vl-some '(lambda ( a b ) (not (or (equal (angle a b) (* 0.0 pi) 1e-8) (equal (angle a b) (* 0.5 pi) 1e-8) (equal (angle a b) (* 1.0 pi) 1e-8) (equal (angle a b) (* 1.5 pi) 1e-8) (equal (angle a b) (* 2.0 pi) 1e-8)))) (append clistx clistx) (append (cdr clistx) (list (car clistx)) (cdr clistx) (list (car clistx)))) (setq clistx (append (list (list (car (last clistx)) (cadr (car clistx)))) clistx)) ) (setq resultent (lwpolybylist (LM:Unique clistx) 1)) ) (vla-EndUndoMark acdoc) (princ) ) HTH. M.R.
    1 point
  7. See if this topic can help you... It seems that doesn't, but imagine that you had more LWPOLYs and you wanted to join them... Then this would be full hit... https://www.cadtutor.net/forum/topic/63954-lisp-to-create-a-boundary-around-blocks-that-are-not-touching
    1 point
×
×
  • Create New...